What Are You Looking For?
|
Power supply voltage |
220-240V 50/60Hz, PE |
|
Motor protection |
No external protection required |
|
IP class |
IP42 |
|
Insulation class |
F |
|
Humidity(RH) |
Max. 95% |
|
System pressure |
1.0 MPa |
|
Compliance |
CE/ GS/ EMC/ LVD/RoHS/REACH |
|
Environment temperature |
0～+40℃ |
|
Temperature class |
TF95 |
|
Liquid temperature |
2～+110℃ |
Item NO.:
Instant Pro 15-1.51. Domestic hot water recirculation
2. Domestic heating and hot water circulation systems
3. Hot water heater circulation systems
Intelligent Control – Automatically adapts to system conditions
User-Friendly Interface – One-button mode switching
Visual Feedback – Max/Min/AUTO indicators
Timer & Temp Control – Set your schedule and perfect temperature
Domestic-safe Design – Copper body and multi-protection setup
Product photo and control modes
 |
|
Instant Pro 15-1.5 for domestic hot-water recirculation in single- and two-family houses are suitable for drinking water with a corrosion-resistant pump housing.
The pump is equipped with a high-efficiency permanent-magnet motor, with power consumption lowest to 5W.
Instant Pro 15-1.5 is designed for recirculation of domestic hot water in single- and two-family houses securing hot water instantly to all faucets.
The pumps have a corrosion-resistant pump housing suitable for drinking water and are powered by a single-phase, high-efficiency ECM with permanent-magnet rotor.
The Auto function adjusts the pump performance to actual system performance.
The unique Auto feature is saving up to 48 % heat energy and 97 % motor energy compared with a standard pump in continuous operation. Additionally, the pump can be set to temperature control mode and continuous operation 100 % for commissioning of the pump or 24 hours instant hot water.
The pumps are equipped with a flushing function which automatically circulates water to protect against bacterial growth in the pipes.
Installation Drawing
Power cord: European plug: meet VDE, IP44 certification requirements; 3 * 0.75mm ²
Tags :
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Max Flow 20 l/min Max Head 12 m Max Input Power 45 W Max Efficiency 23% Voltage AC 230V Insulation Class H Noise ＜42dB(A) Protection Level IP44
Model Basic 40-12SF Pro Power 700W Max.flow 14m³/h Max head 14m Voltage/ Frequency 230/380V 3pH 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP42 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%)
Enclosure class IPX4D (EN 60529) Insulation class H Supply voltage 1 × 230 V ± 10 % 50 Hz, PE Digital input PWM 0–10 V Analog input 4–20 mA. 0–10 W direct current Connection bus input Modbus RTU Leakage current Leakage < 3.5 mА. Leakage current is measured in accordance with EN 60335-1 EMC Standards applied: EN61000-3-2, EN61000-6-3, EN61800-3-3, EN55014-1 and EN55014-2
Voltage AC 380V Max Flow 60m³/h Max Head 42m Communication PWM Power 6000W IP Class IP67 Connector Chuck
Model Basic 25-6S/Basic 25-6SB/Basic 25-6SN/Basic 25-6SQ Pump Body Length 130/180mm Power 100/70/55W Max.flow 3.3m³/h Max head 6m Current 0.45/0.35/0.25A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q), Plastic (P) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃(mixture of glycol and water up to 50%) Max System Pressure 1.0Mpa Certificates CE, GS, UL, LVD, EMC, RoHS, REACH etc.
Maximum flow 6 m³/h Maximum head 12m Rated flow 5.5m³/h Rated head 7.5m Rated voltage AC 220-240V Rated current 1.2A Frequency 50/60Hz Maximum power 230 W Design pressure 1.0MPa Noise ＜40dB(A) Standby power ≤4W Degree of protection IP44 Surge current ＜10A Speed 1000～4900rpm Temperature class TF110 Weight of bare pump with wire 5kg±5%
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%)
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2
Rated voltage 220V Rated power 550W Rated flow 2m³/h Rated current 3.46A Max. flow 6m³/h Rated head 28m Design pressure 10bar Max. head 33m Protection class IP54 Insulation class F Frequency 50Hz Vibration ＜2.8mm/s Noise ＜55dB(A) Max.power 650W
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
