What Are You Looking For?
|
Max Flow |
20 l/min |
|
Max Head |
12 m |
|
Max Input Power |
45 W |
|
Max Efficiency |
23% |
|
Voltage |
AC 230V |
|
Insulation Class |
H |
|
Noise |
＜42dB(A) |
|
Protection Level |
IP44 |
Item NO.:
Instant 15-12EDomestic heating and domestic water supply systems
Air conditioning systems
One button start: users touch the "start" button, the pump starts to run, when the water temperature reaches the upper limit of the set temperature or no flow in the pipeline when the pump stops running, after the start of the click on the "start"button can be turned off the pump again.
Timing function: The current time is in the set time period, if the water temperature is lower than the set temperature limit, the pump starts to run, when the water temperature reaches the set temperature limit or no flow in the pipeline when the pump stops running.
All-day mode function:If the water temperature is lower than the lower limit of the set temperature, the pump starts to run, when the water temperature reaches the upper limit of the set temperature or there is no flow in the pipeline, the pump stops running.
Tap start introduction: lift the tap for about l second, the pump starts to run,when the water temperature reaches the upper limit of the set temperature or there is no flow in the pipeline, the pump stops running, or runs continuously for3min to less than the upper limit of the set temperature when the pump stops running.
Conditions of use (shaft kept horizontal)
Use medium: fresh water or water +glycol(≤50%) mixture
Medium Water Temperature:0℃~80℃
Ambient temperature:0℃~+40℃.
Inlet pressure:>0.05bar
Media hardness: 25°dH
Relative humidity of the air: 95% maximum
Installation Drawing
To install Instant 15-12E Series Electric Pump, the arrow on the pump casing indicates the direction of liquid flow through the pump body.
When mounting the electric pump in line, the inlet and outlet shall be fitted with the two gaskets provided.
The electric pump shaft must be in a horizontal position when installed.
Tags :
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP42 Insulation class F Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF95 Liquid temperature 2～+110℃
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Max. Flow (m³/h) 28.02 Max. Flow (m³/h) 18.48 Max. Head(m) 30 Rated head(m) 20 Inlet diameter (mm) 50 Outlet diameter(mm) 50 Input power(KW) 2.8 Output Power(KW) 2.2
Model Basic 25-8S,Basic 25-8SN Power 245/190/135W Max.flow 6m³/h Max head 8m Current 1.1/0.85/0.6A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃(mixture of glycol and water up to 50%) Max System Pressure 1.0Mpa Certificates CE, GS, UL, VD, EMC, RoHS, REACH etc.
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron/Stainless steel Energy(EEI) ≤0.23-Part2
Power supply voltage 220V~240V,AC,Protective earth Motor protection No external protection required IP class IP67 Insulation class H Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI/CCC Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature -20~+95℃ Connection/Unions Molex/TE
Product model Basic S 25-6S; Basic S 25-6SQ Ambient temperature 0 ~+40 °C Temperature of pumped liquid +2 ~ +110 °C Storage temperature -30 ~ +55 °C Pumps with unions 1.0 MPa (10 bar) Pump housing cast iron, stainless-steel(N) Port to port length 130/180mm
Power supply voltage 220~240V 50/60Hz, AC Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃(Glycol up to 50%)
Voltage AC 380V Max Flow 8m³/h Max Head 42m Communication PWM Power 1300W IP Class IP67 Connector Chuck
Model Basic 32-16S Pump housing cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃(mixture of glycol and water up to 50%) Max System Pressure 1.0Mpa Certificates CE, GS, UL, VD, EMC, RoHS, REACH etc.
Product model Basic S 20-4S; Basic S 20-4SN Ambient temperature 0 ~+40 °C Temperature of pumped liquid +2 ~ +110 °C Storage temperature -30 ~ +55 °C Pumps with unions 1.0 MPa (10 bar) Pump housing cast iron, stainless-steel(N) Port to port length 130mm
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
