What Are You Looking For?
|
Model |
PROMO 15-9A, PROMO 15-9AB, PROMO 15-9AN, PROMO 15-9AQ |
|
Power |
120w |
|
Voltage |
230V |
|
Frequency |
50Hz |
|
Max Flow |
1.78m3/h |
|
Max Head |
9m |
|
Rated Head |
7.5m |
|
Diameter |
15mm |
|
IP Grade |
IP42 |
|
Temperature |
2 -60℃ |
|
Pump housing |
cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) |
|
Pumped liquid |
Water |
|
Insulation class |
H |
|
Degree of Protection |
IP44 |
|
Max System Pressure |
1.0Mpa |
|
Certificates |
CE, GS, UL, VD, EMC, RoHS, REACH etc. |
Item NO.:
Promo 15-9A1. Domestic hot water recirculation
2. Industrial boiler systems
3. The pump for domestic hot-water recirculation in single- and two-family houses is suitable for drinking water with a corrosion-resistant pump housing.
Promo 15-9A is a domestic booster designed for pressure boosting of drinking water supplied from an external source in residential homes. The circulator booster pumps increase the pressure of domestic water to make the required pressure available at showers, taps and other tapping points.
Port-to-port length.: This pump has an inlet and outlet port of 3/4. The pressure rating of the pump corresponds with PN 10 and a port-to-port length of 160 mm.
The Promo 15-9A provides the comfort of constant water pressure with automatic start and stop. This is controlled by the integrated flow switch ensuring optimal start/stop of the booster pump according to demand. The design is robust and built upon corrosion-free materials and catachresis-coated cast iron pump housing to ensure a long lifetime. The pump is a canned rotor pump type where pump and motor form an integral unit without shaft seal. This pump must always be installed with horizontal motor shaft.
Installation Drawing
Tags :
Operation range Feed up to 2.8 m³/h Head up to 12 m Supply voltage 1 x 230 V Liquid temperature from 2 to +60 °C Ambient temperature from 2 to +40 °C Max. operating pressure 6 bar Connection of PROMO 15-12A G 3/4"
Model Master SD 32-7 180 Maximum flow(m³/h) 4.2 Maximum head(m) 7.0 EEI EEI≤0.20-Part2 Rated voltage 220-240V AC Rated current 0.5 A Frequency 50/60Hz Maximum power 52 W Design pressure 1.0MPa Noise ≤42dB(A) IP class IP44 Insulation class H
Power supply 220V, 50Hz single-phase alternating current Maximum system pressure ≤0.3MPa Insulation class B Protection level IPX5 Ambient temperature during work within the range of 0°C to 50°C The temperature of the conveying liquid within the range of 5°C to 50°C Delivery liquid clear water
Model Basic 50-20SF Pro Power 1500W Max.flow 35m³/h Max head 16m Voltage/ Frequency 380V/50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
Model Basic 25-16S Power 700/450/400W Max.flow 14.5/12/9.2m³/h Max head 16/13/11m Voltage/ Frequency 220/380V 3pH 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP42 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Rated voltage 220V Rated head 18m Rated flow 8m³/h Maximum head 48m Maximum flow 15m³/h Insulation class F Design pressure 10bar Vibration ＜2.8mm/s Protection class IP54 Frequency 50Hz Maximum Unit Efficiency 49% Rated power 1500W Noise ＜55dB(A) Maximum power 1900W
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron/Stainless steel Energy(EEI) ≤0.23-Part2
Model Basic 15-12S Power 270/240/160W Max.flow 3.5m³/h Max head 12m Current 1.2/1.1/0.75A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
Enclosure class IPX4D (EN 60529). Insulation class H. Supply voltage 1 × 230 V ± 10 % 50 Hz, PE Digital input PWM 0–10 V Analog input 4–20 mA. 0–10 W direct current Connection bus input Modbus RTU Leakage current Ileakage < 3.5 mА. Leakage current is measured in accordance with EN 60335-1. EMC Standards applied: EN61000-3-2, EN61000-6-3, EN61800-3-3, EN55014-1 and EN55014-2
Pump Body Length 8 1/2 Feet Power 245W Max.flow 44 gpm Max head 26 Feet Current 2.2A Voltage/ Frequency 110V 60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron/Stainless steel Energy(EEI) ≤0.23-Part2
Model Master SD 20-5 130 Maximum flow (m³/h) 2.8 Maximum head (m) 5.0 EEI EEI≤0.20-Part2 Rated voltage 220-240V AC Rated current 0.5 A Frequency 50/60Hz Maximum power 33 W Design pressure 1.0MPa Noise ≤42dB(A) IP class IP44 Insulation class H
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
