What Are You Looking For?
|
Max. Flow |
2.8 m³/h |
|
Max. Head |
12 m |
|
Supply voltage |
1 x 230 V |
|
Liquid temperature |
from 2 to +60 °C |
|
Ambient temperature |
from 2 to +40 °C |
|
Max. operating pressure |
6 bar |
|
Connection of Promo 15-12A |
G 3/4" |
Item NO.:
Promo 15-12A1. Promo pumps are designed to increase the pressure in the currently used water supply systems of private houses.
2. First of all, they are used to generate head before heaters (gas-fired water heaters and direct-flow water heaters), washing machines and dishwashers.
3. Promo can also be used to increase water pressure in the shower or other points of water distribution.
4. Promo pumps are used in open systems and can be directly connected with the water supply system.
5. Promo pumps are equipped with a built-in flow relay that is used for automatic turning on/off the pump when the tap is open in the water distribution point.
6. The pumps are available with cast iron housing with a cataphoretic coating, impeller is made of composite material.
Operating conditions
Minimum inlet port pressure — 0.2 bar.
The pump should be placed in a non-aggressive and non-explosive environment.
Relative air humidity — not more than 95 %.
Pumped liquids
1. clean water.
2. chlorinated tap water.
3. The pump should not be used for pumping explosive liquids such as diesel fuel, petrol and other similar liquids.
Construction
These pumps are of the canned-rotor type, that is pump and motor form an integral unit without shaft seal. Only two gaskets are required for sealing. The bearings are lubricated by the pumped liquid.
Thus, Promo motor is cooled with pumped liquid and is not equipped with air fan, which allows it working silently.
Due to a unique system of ceramic bearings, Promo pumps are exclusively durable and reliable. The pump is supplied with a cable with a Schuko plug.
A motor of Promo 15-12A is equipped with thermal overloading protection. In both cases, it is not necessary to have an additional external protection of the motor.
Enclosure class: IP42.
Insulation class: H.
Tags :
Model Promo 15-9A, Promo 15-9AB, Promo 15-9AN, Promo 15-9AQ Power 120w Voltage 230V Frequency 50Hz Max Flow 1.5m3/h Max Head 9m Rated Head 7.5m Diameter 15mm IP Grade IP42 Temperature 2 -60℃ Pump housing cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) Pumped liquid Water Insulation class H Max System Pressure 1.0Mpa Certificates CE, GS, UL, VD, EMC, RoHS, REACH etc.
Rated Power 140W Max.flow 6.5m³/h Max head 11m Rated Current 1.09A Voltage/ Frequency 230V 50HZ/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range -30-95℃ Energy(EEI) ≤0.21-Part3 Max System Pressure 1.0MPa
Model Basic 25-8SB Power 245/190/135W Max.flow 6m³/h Max head 8m Current 1.1/0.85/0.6A Voltage/ Frequency 115/230V 50/60HZ Pump housing Brass Pumped liquid Clean Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃(mixture of glycol and water up to 50%) Max System Pressure 1.0Mpa Certificates CE, GS, UL, VD, EMC, RoHS, REACH,UKCA etc.
Max. Flow(L/min) 115 Rated flow(L/min) 50 Max. Head(m) 25 Rated head(m) 20 Inlet diameter (mm) 25 Outlet diameter(mm) 25 Input power(W) 880 Output Power(W) 600
Model Basic 20-7SN Power 130/110/90W Max.flow 3.5m³/h Max head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V 50/60HZ Pump housing stainless steel body Pumped liquid clean Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Voltage AC 380V Max Flow 40m³/h Max Head 31m Communication PWM Power 4000W IP Class IP55 Connector Chuck
Rated voltage 220～240V Rated current 2.1A Frequency 50/60Hz Maximum flow 19m³/h Maximum head 12m Maximum power 460 W Rated flow 14m³/h Rated head 7m System pressure 1.0MPa Insulation class H Temperature grade TF110
Power supply voltage 220V~240V,AC,Protective earth Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature 2~+95℃ Connection/Unions Shinhoo Standard/ Molex/TE
Model Basic 25-7S,Basic 25-7SN Pump Body Length 130/180mm Power 130/110/90W Max.flow 4m³/h Max head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V, 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Model Basic 25-7SN Pump Body Length 130/180mm Power 130/110/90W Max.flow 4m³/h Max head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V, 50/60HZ Pump housing stainless steel body Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Power supply voltage 220~240V 50/60Hz, AC Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃(Glycol up to 50%)
Max. flow(m³/h) 5.5 Rated flow(m³/h) 3 Design pressure 1.0MPa Max. head(m) 45 Rated head(m) 30 Protection class IP44 Voltage AC 220V/50Hz Max. input power 600W Max. speed 5000rpm Protection class IP44 Voltage AC 220V/50Hz Max. input power 600W Max. speed 5000rpm
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
