What Are You Looking For?
|
Power Supply Voltage |
115V +6%/-10%，60Hz，PE
|
|
Power
|
45W
|
|
Degree of Protection
|
IP42
|
|
Insulation Class
|
H
|
|
Relative Humidity（RH）
|
Max. 95%
|
|
System Load Bearing
|
1.0 MPa |
Item NO.:
GPA 15-6FGoods Stock:
1It is mainly used in domestic heating and water circulation of domestic hot water system.
The product is most applicable to the following systems:
This pump is equipped with permanent-magnet motor and differential pressure controller, capable of automatically & continuously adjusting motor performance to meet the actual needs of system.
Easy installation and start-up
In most cases, the motor pump needs no adjustment and can be readily started and automatically adjusted to meet the actual needs of the systems.
High-degree comfort
Low operational noise of motor pump and whole system.
Low energy consumption
The pump has lower energy consumption comparing with conventional Pump. The minimum energy consumption downs to 5W.
Operating Conditions
Ambient Temperature
Ambient temperature: 0℃～+40℃
Relative humidity（RH）:
Max. humidity: 95%
Medium (liquid delivery) temperature
To avoid condensation in control box and the stator, the temperature of liquid pumped by the motor pump must be always higher than ambient temperature.
System Pressure
Maximum pressure 1.0MPa(10bar).
Degree of Protection
IP42
Inlet Pressure
To avoid damage to pump bearing due to cavitation noise, the pump inlet shall maintain the following minimum pressure:
|
Liquid Temperature
|
＜85℃
|
90℃
|
110℃
|
|
Inlet Pressure
|
0.05bar
|
0.28bar
|
1bar
|
|
0.5m head
|
2.8m head
|
10m head
|
Pumping Liquid
The pumping liquid includes thin, clean, non-corrosive and non-explosive liquid which shall not contain any solid particles, fiber or mineral oil, and the pump must definitely not be used to pump inflammable liquid such as rapeseed oil and gasoline. If the circulating pump is used in a place with relatively high viscosity, the pump has lower performance. So when choosing a pump, the viscosity of liquid must be taken into account.
 |
|
Installation Dimensions
Tags :
Model Basic 20-7S Pro Maximum flow 3.5m³/h Rated flow rate 2m ³/ h Maximum head 7m Rated head 4.7m Current 0.73/0.52/0.33A Input Power 70/115/140W Ingress protection IP44 Noises Index(Rated flow point) <48dB(A)
Max. Flow(L/min) 200 Rated flow(L/min) 110 Max. Head(m) 25 Rated head(m) 17.5 Inlet diameter (mm) 32 Outlet diameter(mm) 32 Input power(W) 1100 Output Power(W) 750
Model Basic 32-12SXL-180 Pro /Basic Pro 32-12SXL-220 Pro Rated Voltage/Frequency 230V/50Hz Insulation class Class H IP class IP44 Noise Index ≤50dB(A) Max System Pressure 10bar(1.0 MPa) Medium liquid Clean water Certification CCC\GS\UL\CE\RoHS\REACH\EEI
Model Basic 25-7SB Pump Body Length 130mm Power 130/110/90W Max.flow 4m³/h Max. head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V, 50/60HZ Pumped liquid Clean Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa Pump Housing Brass body
Power supply voltage 230V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Model Basic 40-16F Power 1000W Max.flow 16m³/h Max head 16m Current 4.9A Voltage/ Frequency 230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Rated voltage 230V AC Rated current 3.4A Frequency 50/60Hz Maximum flow 23m³/h Maximum head 20 m Maximum power 750 W Rated flow 15.8m³/h Rated head 10.8m System pressure 1.0MPa Insulation class H Temperature grade TF110
Voltage(V) 230/380 Power(W) 1000/860/580 Max Flow(m³/h) 10 Insulation Class H Protection Class IP44 System Pressure(bar) 10 Noise Index ≤50dB(A)
Max. Flow (m³/h) 28.02 Max. Flow (m³/h) 18.48 Max. Head(m) 30 Rated head(m) 20 Inlet diameter (mm) 50 Outlet diameter(mm) 50 Input power(KW) 2.8 Output Power(KW) 2.2
Max Flow 6.6gpm Max Head 39 feet Max Input Power 45 W Max Efficiency 23% Voltage 220V Insulation Class H Noise ＜42dB(A) Protection Level IP44
Model U(V)/f(Hz) Head Q（m³/h） P（W） I(A) GPA15-7.5 III Z178 pro 230/50 7.5 2.6 60 0.50 7 2.4 52 0.45 6 2.2 39 0.35 5 2.1 33 0.30
Product model Basic S 32-7S;Basic S 32-7SN Ambient temperature 0 ~+40 °C Temperature of pumped liquid +2 ~ +110 °C Storage temperature -30 ~ +55 °C Pumps with unions 1.0 MPa (10 bar) Pump housing cast iron, stainless-steel(N) Port to port length 180mm
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
