What Are You Looking For?
|
Max Flow |
6.6gpm |
|
Max Head |
39 feet |
|
Max Input Power |
45 W |
|
Max Efficiency |
23% |
|
Voltage |
220V |
|
Insulation Class |
H |
|
Noise |
＜42dB(A) |
|
Protection Level |
IP44 |
Item NO.:
Instant 15-12EDomestic heating and domestic water supply systems
Air conditioning systems
One button start: users touch the "start" button, the pump starts to run, when the water temperature reaches the upper limit of the set temperature or no flow in the pipeline when the pump stops running, after the start of the click on the "start"button can be turned off the pump again.
Timing function: The current time is in the set time period, if the water temperature is lower than the set temperature limit, the pump starts to run, when the water temperature reaches the set temperature limit or no flow in the pipeline when the pump stops running.
All-day mode function:If the water temperature is lower than the lower limit of the set temperature, the pump starts to run, when the water temperature reaches the upper limit of the set temperature or there is no flow in the pipeline, the pump stops running.
Tap start introduction: lift the tap for about l second, the pump starts to run,when the water temperature reaches the upper limit of the set temperature or there is no flow in the pipeline, the pump stops running, or runs continuously for3min to less than the upper limit of the set temperature when the pump stops running.
Conditions of use (shaft kept horizontal)
Use medium: fresh water or water +glycol(≤50%) mixture
Medium Water Temperature:0℃~80℃
Ambient temperature:0℃~+40℃.
Inlet pressure:>0.05bar
Media hardness: 25°dH
Relative humidity of the air: 95% maximum
Installation Drawing
To install Instant 15-12E Series Electric Pump, the arrow on the pump casing indicates the direction of liquid flow through the pump body.
When mounting the electric pump in line, the inlet and outlet shall be fitted with the two gaskets provided.
The electric pump shaft must be in a horizontal position when installed.
Tags :
Power Supply Voltage 115V +6%/-10%，60Hz，PE Motor Protection the pump needs no external protection Degree of Protection IP42 Insulation Class H Relative Humidity（RH） Max. 95% System Load Bearing 1.0 MPa
Pump Body Length 8 1/2 Feet Power 245W Max.flow 62 GPM Max head 14 Feet Current 2.2A Voltage/ Frequency 110V 60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Voltage AC 220V Max Flow 15m³/h Max Head 37m Communication PWM Power 1000W IP Class IP56 Connector Chuck
Model Master SD 25-5 130/Master SD 25-5 180 Maximum flow(m³/h) 3.0 Maximum head(m) 5.0 EEI EEI≤0.20-Part2 Rated voltage 220-240V AC Rated current 0.5 A Frequency 50/60Hz Maximum power 33 W Design pressure 1.0MPa Noise ≤42dB(A) IP class IP44 Insulation class H
Rated voltage 380V Rated head 32m Rated flow 16m³/h Maximum head 48m Maximum flow 23m³/h Insulation class F Design pressure 10bar Vibration ＜2.8mm/s Protection clas IP54 Frequency 50Hz Rated current 4.52A Rated power 2200W Noise ＜63dB(A) Maximum power 3100W
Rated voltage AC 220-240V Maximum flow 10m³/h Rated flow 5.5m³/h Frequency 50/60Hz Rated current 1.1A Maximum head 12 m Rated head 7.5m Input power 220 W
Product model Basic S 32-5S; Basic S 25-5SQ Ambient temperature 0 ~+40 °C Temperature of pumped liquid +2 ~ +110 °C Storage temperature -30 ~ +55 °C Pumps with unions 1.0 MPa (10 bar) Pump housing cast iron, stainless-steel(N) Port to port length 180mm
Power supply voltage 220V~240V,AC,Protective earth Motor protection No external protection required IP class IP67 Insulation class H Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI/CCC Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature -20~+95℃ Connection/Unions Molex/TE
Max. Flow(L/min) 125 Rated flow(L/min) 80 Max. Head(m) 30 Rated head(m) 20 Inlet diameter (mm) 32 Outlet diameter(mm) 32 Input power(W) 1250 Output Power(W) 750
Model Basic 25-20 Power 1000W Max.flow 15m³/h Max head 20m Current 4.9A Voltage/ Frequency 230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Power supply voltage 230V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Max. Flow(L/min) 190 Rated flow(L/min) 135 Max. Head(m) 5 Rated head(m) 3 Inlet diameter (mm) 50 Outlet diameter(mm) 50 Input power(W) 220 Output Power(W) 125
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
