What Are You Looking For?
|
Max Flow |
8.5m³/h |
|
Rated Flow |
6m³/h |
|
Pressure |
1.0MPa |
|
Max Input Power |
700W |
|
Max Head |
28m |
|
Rated Head |
22m |
|
Insulation |
IP55 |
|
Weight |
6kg±5% |
|
Noise index |
＜60dB(A)(Max flow) |
|
Voltage |
AC 220~240V/50Hz |
|
Max Rotation Speed |
5000rpm |
Item NO.:
PFB 06-22 Pro1. Air asource heat pump systems
2. Solar heating systems
3. Domestic hot water system
1. The inside of the pump body adopts special coating, which is not easy to rust;
2. Large flow, compact structure design;
3. Environmental protection, beautiful appearance, convenient installation and reliable operation.
Motor Type
|
Motor type: permanent magnet synchronous motor |
Enameled wire material: copper |
Magnet material: NdFeB |
|
Motor DC cold state resistance at 20°C: 3.77±5%Ω |
Insulation class: F |
|
Medium
|
Medium: water or glycol(≤50%) mixed liquid |
Medium Temperature: 0℃～90℃ |
Medium PH Value：6.5～8.5 |
|
Medium Hardness：≤25°dH |
Solid impurity : the diameter and length are ≤0.1mm, the volume ratio is ≤0.1% |
|
Installation Drawing
Performance Curve
This performance curve is suitable for clean water at room temperature. If the pump is used for non-clean water media, the hydraulic performance of the pump will be reduced. Therefore, the characteristics of the liquid to be transported must be considered when choosing a pump.
Constant speed mode (HS mode) performance curve
Constant voltage mode (HD mode) performance curve
Proportional mode (BL mode) performance curve
Tags :
Rated voltage AC 220V Maximum flow 14m³/h Rated flow 8m³/h Max speed 3600rpm Maximum head 58 m Rated head 36m Frequency 50Hz Maximum power 1800 W System pressure 1.0MPa Standby power ≤6W
Model U(V)/f(Hz) Head Q（m³/h） P（W） I(A) GPA15-7.5 III Z107 pro 230/50 7.5 2.6 60 0.50 7 2.4 52 0.45 6 2.2 39 0.35 5 2.1 33 0.30
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%)
Max Flow 23 l/min Max Head 12 m Max Input Power 45 W Max Efficiency 30% Voltage DC24V Insulation Class H Noise ＜42dB（A Protection Level IPX4
Maximum flow(m³/h) 90 Rated flow(m³/h) 50 Maximum head(m) 21 Rated head(m) 15 Inlet pipe diameter(mm) 25 Outlet pipe diameter(mm) 25 Input power(kW) 660 Output power(kW) 400
Model Basic 32-12 Power 500W Max.flow 10.5m³/h Max head 12m Current 2.5A Voltage/ Frequency 115/230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
Enclosure class IPX4D (EN 60529). Insulation class H. Supply voltage 1 × 230 V ± 10 % 50 Hz, PE Digital input PWM 0–10 V Analog input 4–20 mA. 0–10 W direct current Connection bus input Modbus RTU Leakage current Ileakage < 3.5 mА. Leakage current is measured in accordance with EN 60335-1. EMC Standards applied: EN61000-3-2, EN61000-6-3, EN61800-3-3, EN55014-1 and EN55014-2
Model Basic 65-8F Power 700W Max.flow 34m³/h Max head 8m Current 3.4A Voltage/ Frequency 230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Max. Flow(L/min) 125 Rated flow(L/min) 80 Max. Head(m) 30 Rated head(m) 20 Inlet diameter (mm) 32 Outlet diameter(mm) 32 Input power(W) 1250 Output Power(W) 750
Product model Basic S 25-8S; Basic S 25-8SN Ambient temperature 0 ~+40 °C Temperature of pumped liquid +2 ~ +110 °C Storage temperature -30 ~ +55 °C Pumps with unions 1.0 MPa (10 bar) Pump housing cast iron, stainless-steel(N) Port to port length 180mm
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2
Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 110/230V, 60Hz Pump housing Cast iron/Stainless steel Energy(EEI) ≤0.23-Part2
NO.1 Yanglin Road, Hi-tech Development Zone, 230088 Hefei, Anhui, P.R. China
© ANHUI SHINHOO CANNED MOTOR PUMP CO.,LTD All Rights Reserved.皖ICP备2024062579号
IPv6 
