What Are You Looking For?
|
Max Flow |
8.5m³/h |
|
Rated Flow |
6m³/h |
|
Pressure |
1.0MPa |
|
Noise index |
＜58dB(A)(Max flow) |
|
Max Head |
28m |
|
Rated Head |
22m |
|
Insulation |
IP55 |
|
Weight |
5.7kg±5% |
|
Voltage |
AC 220V/50Hz |
|
Max Input Power |
700W |
|
Max Rotation Speed |
5000rpm |
Item NO.:
PFB 06-22 EC1. Air and ground source heat pump systems
2. Solar thermal systems
3. Domestic heating
4. Hot water supply systems
1. The inside of the pump body adopts special coating, which is not easy to rust;
2. Large flow, compact structure design;
3. Environmental protection, beautiful appearance, convenient installation and reliable operation.
Motor Type
|
Motor type: permanent magnet synchronous motor |
Enameled wire material: copper |
Magnet material: NdFeB |
|
Motor DC cold state resistance at 20°C: 3.77±5%Ω |
Insulation class: F |
|
Medium
|
Medium: water or glycol(≤50%) mixed liquid |
Medium Temperature: 0℃～90℃ |
Medium PH Value：6.5～8.5 |
|
Medium Hardness：≤25°dH |
Solid impurity : the diameter and length are ≤0.1mm, the volume ratio is ≤0.1% |
|
Installation Drawing
Tags :
Max. flow(m³/h) 5.5 Rated flow(m³/h) 3 Design pressure 1.0MPa Max. head(m) 45 Rated head(m) 30 Protection class IP44 Voltage AC 220V/50Hz Max. input power 600W Max. speed 5000rpm Protection class IP44 Voltage AC 220V/50Hz Max. input power 600W Max. speed 5000rpm
Max. flow(m³/h) 5.5 Rated flow(m³/h) 3 Design pressure 1.0MPa Max. head(m) 45 Rated head(m) 30 Protection class IP44 Voltage AC 220V/50Hz Max. input power 600W Max. speed 5000rpm Protection class IP44 Voltage AC 220V/50Hz Max. input power 600W Max. speed 5000rpm
Power supply voltage 220~240V 50/60Hz, AC Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃(Glycol up to 50%)
Power supply voltage 220~240V 50/60Hz, AC Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃(Glycol up to 50%)
Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 110/230V，60HZ Pump housing Cast iron/Stainless steel Energy(EEI) ≤0.23-Part2
Model Basic 25-12, Basic 25-12N Pump housing cast iron, stainless steel body(N) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃(mixture of glycol and water up to 50%) Max System Pressure 1.0Mpa Certificates CE, GS, UL, VD, EMC, RoHS, REACH etc.
Model Basic 25-7S,Basic 25-7SN Pump Body Length 130/180mm Power 130/110/90W Max.flow 4m³/h Max head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V, 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Power supply voltage 230V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Enclosure class IPX4D (EN 60529) Insulation class H Supply voltage 1 × 230 V ± 10 % 50 Hz, PE Digital input PWM 0–10 V Analog input 4–20 mA. 0–10 W direct current Connection bus input Modbus RTU Leakage current Leakage < 3.5 mА. Leakage current is measured in accordance with EN 60335-1 EMC Standards applied: EN61000-3-2, EN61000-6-3, EN61800-3-3, EN55014-1 and EN55014-2
Maximum flow (m3/h) 2.3 Maximum head(m) 7.5 Rated flow rate (m3/h) 1 Rated head (m) 6.5 Voltage 220~240V AC Current 0.45A Frequency 50/60Hz Input power 60W Design pressure 0.3MPa Noise ≤42dB(A) Standy power ≤3W Protection grade IP44 Surge current <3A Temperature class TF95 Bare pump weight 1.3kg±5%
Maximum flow(m³/h) 8 Rating flow(m³/h) 4 Maximum head(m) 33 Rating head(m) 25 Inlet pipe diameter RP1 1/4" Outlet pipe diameter NPT1" Input powwer(KW) 0.8 IP class IP42
Model Basic 40-16SF Pro Power 1000/700/600W Max.flow 17/14/12m³/h Max head 16.2/15.5/14.5m Voltage/ Frequency 230/380V 3pH 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP42 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
