What Are You Looking For?
|
Max Flow |
23 l/min |
|
Max Head |
12 m |
|
Max Input Power |
45 W |
|
Max Efficiency |
30% |
|
Voltage |
DC24V |
|
Insulation Class |
H |
|
Noise |
＜42dB（A |
|
Protection Level |
IPX4 |
Item NO.:
SPA15-12EGas water heater system
Solar heating system
Domestic hot water system
Features
▷This product has the characteristics of simple structure, small size, easy installation, easy maintenance, and low noise. It is a low-flow and high-head centrifugal pump. The product is driven by an intelligent program and has low-pressure protection, over-voltage protection, over-current protection, and stalling protection, and has a power limiting function to prevent overload.
Installation and safe use instructions
▷ The water pump installation direction is such that the water pump outlet is vertically upward and the pump shaft is placed horizontally.
▷ The water pump needs to be installed in a place to prevent rain, water, exposure, etc.
▷ The water pump cannot directly collide with hard objects, and cannot be impacted by water hammer exceeding 12 kg.
▷ The motor lead does not have a special structural design to prevent it from being pulled off. Please do not apply direct force to avoid breaking the wire.
▷ It is forbidden to run the water pump without water to prevent product wear and tear, or even machine burn-in.
▷ Suitable for easy-flowing, low-viscosity, clean, non-corrosive and non-explosive media, and the media must not contain solid particles or fibers that may cause mechanical or chemical damage to the water pump.
▷ The remaining water in the pump (after shipping inspection) will not cause clogging of the pump shaft or freezing during transportation will not cause the pump body to crack.
▷After the water pump is transported, the quality must be guaranteed between Shinhoo and the customer.
|
SPA15-12E |
|||||
|
Flow（m3/h） |
Head（m） |
Voltage |
Current |
Inlet Power（W） |
Efficiency |
|
0.000 |
12.152 |
24 |
1.58 |
37.80 |
0.09 |
|
0.177 |
11.833 |
24 |
1.91 |
45.80 |
12.44 |
|
0.301 |
10.962 |
24 |
1.93 |
46.40 |
19.17 |
|
0.394 |
10.021 |
24 |
1.91 |
45.80 |
23.45 |
|
0.484 |
9.361 |
24 |
1.90 |
45.60 |
27.03 |
|
0.608 |
8.41 |
24 |
1.88 |
45.20 |
30.78 |
|
0.694 |
7.684 |
24 |
1.88 |
45.00 |
32.24 |
|
0.773 |
7.007 |
24 |
1.87 |
44.80 |
32.89 |
|
0.902 |
5.831 |
24 |
1.85 |
44.50 |
32.16 |
|
0.992 |
5.071 |
24 |
1.85 |
44.50 |
30.76 |
|
1.107 |
4.006 |
24 |
1.83 |
44.00 |
27.42 |
|
1.209 |
2.799 |
24 |
1.83 |
43.90 |
20.97 |
|
1.311 |
1.508 |
24 |
1.83 |
43.80 |
12.28 |
|
1.404 |
0.365 |
24 |
1.82 |
43.70 |
3.19 |
Tags :
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP42 Insulation class F Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF95 Liquid temperature 2～+110℃
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Max Flow 20 l/min Max Head 12 m Max Input Power 45 W Max Efficiency 23% Voltage AC 220V Insulation Class H Noise ＜42dB(A) Protection Level IP44
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2
Model Basic 32-8SF Power 245/190/135W Max.flow 8m³/h Max head 8m Current 1.1/0.85/0.6A Voltage/ Frequency 115/230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Power supply voltage 220V~240V,AC,Protective earth Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature 2~+95℃ Connection/Unions Shinhoo Standard/ Molex/TE
Enclosure class IPX4D (EN 60529). Insulation class H. Supply voltage 1 × 230 V ± 10 % 50 Hz, PE Digital input PWM 0–10 V Analog input 4–20 mA. 0–10 W direct current Connection bus input Modbus RTU Leakage current Ileakage < 3.5 mА. Leakage current is measured in accordance with EN 60335-1. EMC Standards applied: EN61000-3-2, EN61000-6-3, EN61800-3-3, EN55014-1 and EN55014-2
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2
Power supply voltage 230V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature 2～+110℃
Model Basic 25-4S/Basic 25-4SB/Basic 25-4SN/Basic 25-4SQ Pump body length 130/180mm Power 65/50/32W Max.flow 3.0m³/h Max head 4m Current 0.28/0.22/0.15A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) and Plastic (P) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
NO.1 Yanglin Road, Hi-tech Development Zone, 230088 Hefei, Anhui, P.R. China
© ANHUI SHINHOO CANNED MOTOR PUMP CO.,LTD All Rights Reserved.皖ICP备2024062579号
IPv6 
