What Are You Looking For?
|
Model |
Promo 15-9A |
|
Power |
120w |
|
Voltage |
110V |
|
Frequency |
60Hz |
|
Max Flow |
6.6 gpm |
|
Max Head |
29 feet |
|
IP Grade |
IP42 |
|
Temperature |
2 -60℃ |
|
Pump housing |
cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) |
|
Pumped liquid |
Water |
|
Insulation class |
H |
|
Max System Pressure |
1.0Mpa |
|
Certificates |
CE, GS, UL, VD, EMC, RoHS, REACH etc. |
Item NO.:
Promo 15-9A1. Domestic hot water recirculation
2. Industrial boiler systems
3. The pump for domestic hot-water recirculation in single- and two-family houses is suitable for drinking water with a corrosion-resistant pump housing.
Promo 15-9A is a domestic booster designed for pressure boosting of drinking water supplied from an external source in residential homes. The circulator booster pumps increase the pressure of domestic water to make the required pressure available at showers, taps and other tapping points.
Port-to-port length.: This pump has an inlet and outlet port of 3/4. The pressure rating of the pump corresponds with PN 10 and a port-to-port length of 160 mm.
Promo 15-9A provides the comfort of constant water pressure with automatic start and stop. This is controlled by the integrated flow switch ensuring optimal start/stop of the booster pump according to demand. The design is robust and built upon corrosion-free materials and catachresis-coated cast iron pump housing to ensure a long lifetime. The pump is a canned rotor pump type where pump and motor form an integral unit without shaft seal. This pump must always be installed with horizontal motor shaft.
Installation Drawing
Tags :
Max. Flow 12 gpm Max. Head 39 feet Supply voltage 110 V Liquid temperature from 2 to +60 °C Ambient temperature from 2 to +40 °C Max. operating pressure 6 bar Connection of PROMO 15-12A G 3/4"
Model Basic 15-9S Power 120/80/65W Max.flow 1.8m³/h Max head 9m Current 0.53/0.4/0.25A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Power supply voltage 220~240V 50/60Hz, AC Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃(Glycol up to 50%)
Model Basic 25-8S,Basic 25-8SN Power 245/190/135W Max.flow 6m³/h Max head 8m Current 1.1/0.85/0.6A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃(mixture of glycol and water up to 50%) Max System Pressure 1.0Mpa Certificates CE, GS, UL, VD, EMC, RoHS, REACH etc.
Model Basic 20-6SN Power 100/70/55W Max.flow 2.8m³/h Max head 6m Current 0.45/0.35/0.25A Voltage/ Frequency 115/230V 50/60HZ Pump housing stainless steel body Pumped liquid Clean Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Max. Flow 12 gpm Max. Head 39 feet Supply voltage 110 V Liquid temperature from 2 to +60 °C Ambient temperature from 2 to +40 °C Max. operating pressure 6 bar Connection of PROMO 15-12A G 3/4"
Voltage AC 380V Max Flow 48m³/h Max Head 46m Communication PWM Power 5500W IP Class IP55 Connector Chuck
Model U(V)/f(Hz) Head Q（m³/h） P（W） I(A) GPA15-7.5 III Z107 pro 230/50 7.5 2.6 60 0.50 7 2.4 52 0.45 6 2.2 39 0.35 5 2.1 33 0.30
Model Basic 25-16 Power 700W Max.flow 10.5m³/h Max head 16m Current 3.4A Voltage/ Frequency 230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Model Master SD 20-7 130 Maximum flow(m³/h) 3.4 Maximum head(m) 7.0 EEI EEI≤0.20-Part2 Rated voltage 220-240V AC Rated current 0.5 A Frequency 50/60Hz Maximum power 52 W Design pressure 1.0MPa Noise ≤42dB(A) IP class IP44 Insulation class H
Product model Basic S 20-6S; Basic S 20-6SQ Ambient temperature 0 ~+40 °C Temperature of pumped liquid +2 ~ +110 °C Storage temperature -30 ~ +55 °C Pumps with unions 1.0 MPa (10 bar) Pump housing cast iron, stainless-steel(N) Port to port length 130mm
Model Basic 25-7SB Pump Body Length 130mm Power 130/110/90W Max.flow 4m³/h Max. head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V, 50/60HZ Pumped liquid Clean Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa Pump Housing Brass body
No.780,Ming Chuan Road,High-Tech Zone, Hefei, Anhui, P.R China
Compliance Hotline: 0551-62379876
Compliance Email: xuexiujuan@shinhoopump.com
© Anhui Shinhoo Canned Motor Pump Co., Ltd. All Rights Reserved.皖ICP备2024062579号
IPv6 
