circulator pump with check valve
circulator pump with check valve
circulator pump with check valve

Basic 15-6SFRC 115V/60Hz North America circulation pump

Technical data

Pump Body Length

6 1/2 Feet

Power

 100/70/55W

Max.flow

 17 GPM

Max head

 19 Feet

Current

 0.9/0.7/0.5A

Voltage/ Frequency

 115/230V 50/60HZ

Pump housing

 Cast iron

Pump liquid

 Water

Insulation class

 H

Degree of Protection

 IP44

Liquid temperature range

 2-110℃

Max System Pressure

 1.0MPA

  • Item NO.:

    Basic 15-6SFRC

1. Basic series circulator pump, researched and developed by scientific research personnel of our company has following merits : low noise, low leakage, environmental protection, elegant appearance, easy installation, reliable operation and so on.

2. It can be used for single and double-heating systems and large-scale mixed-loop system.

3. It also can be used to supply water and add pressure for mansion of city, villa of suburb, house to match with industrial equipment, to supply water in cycle for cooling air-condition,boiler and solar energy, supply hot water and keep warm in cycle,etc

1. Users can choose models of pump according to the flow, head, power, current etc.

2. The pumps have union connection,flange connection and sweat connection. If customers have some special request, we can design it for you.

3. Material of pump body is usually cast iron, generally used under these conditions, considered to be closed systems pumping water or water/glycol mixtures.

4. If the water conditions exist are not compatible with cast iron, we recommend the bronze or stainless steel, such as the heating system or cycling the potable water in the open system.

Running Conditions

1. Power Source: Voltage115V-230V,Frequency:60Hz

2. The greatest pressure of the system: No more than 145psi (10bar)

3. To avoid NHP damage to the pump bearing, pumps should be maintained the minimum pressure: (In a pressure system, the required inlet pressure is the allowable system pressure. In a system open to the atmosphere, the required inlet pressure is the minimum distance the pump must be located below the lowest possible water level of the water source.

 

Liquid Temperature

185F(85℃)

194'F(90℃)

230F(110℃)

Entrance Pressure

2t(0.6m) Head

10 ft(3m) Head

33 ft(10m) Head

0.7psi(005bar)

4psi(0 28bar)

14.5psi(1bar)

         

         

4. Transmission Fluid: Lean.clean,non-corrosive and non explosive liquids. and without any solid particles fibers or mineral oil. Pump absolutely must not be used to transport flammable liquids such as diesel and petrol.

5. The pumps should work under air temperature of the environment range of32℉(0℃)~104℉(40C), liquid temperature range of 36F(2℃)~230F(110℃). And the ambient temperature should always be lower than the liquid temperature.(One special model:GPD25-12SF, the highest liquid temperature is150F(66℃). Note:If the pump is equipped with a timer, the maximum liquid temperature is150℉(66℃).

Structure of Pumps

1. The main parts of the pump are: pump body, impeller, stator, rotor, shielding sets, gas screws and so on. 

2. Sealing: The pump doesn't use mechanical seal. Stator and rotor are sealed with stainless steel shield. Overall Structure is shielded with two heat-resistant rubber gasket sealed to avoid leakage.

3. Lubrication and Cooling:The pump used in inline cycle. the bearing is lubricated and cooled by water.

4. Motor: The motor is a 2-pole asynchronous squirrel-cage PSC motor.It is class H insulation and equipped with thermal protection. GPD series are single-speed,GPD-S series are three-speed. GPD series can be equipped with timer control to fix the time that pump works.Motor horsepower range from 1/25 to 1/6, and power consumption from 25W to 335W

Basic 15-6SFRC

GPD15-6SFRC  Circulation Pump Booster Pump

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Submit

Related Products

hot water pump manufacturer
Basic 25-12F 115V/60Hz North America circulation pump

Pump Body Length 6 1/2 Feet Power  335W Max.flow  36 GPM Max head  36 Feet Current  1.5A Voltage/ Frequency  230V 50HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

hvac circulator pump With Check Valve
Basic 25-10SFC 115V/60Hz North America circulation pump

Pump Body Length 6 1/2 Feet Power  200/190/135W Max.flow  32 GPM Max head  30 Feet Current  1.8/1.7/1.2A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

circulating pump With Check Valve supplier
Basic 15-4SFC 115V/60Hz North America circulation pump

Pump Body Length 6 1/2 Feet Power  85/60/40W Max.flow  17.5 GPM Max head  15.5 Feet Current  0.74/0.6/0.44A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

circulation pump with Check Valve
Basic 15-6SFC 115V/60Hz North America circulation pump

Pump Body Length 6 1/2 Feet Power  85/60/40W Max.flow  17.5 GPM Max head  15.5 Feet Current  0.74/0.6/0.44A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

circulating pump With Check Valve supplier
Basic 15-4SFRC 115V/60Hz North America circulation pump

Pump Body Length 6 1/2 Feet Power  85/60/40W Max.flow  17.5 GPM Max head  15.5 Feet Current  0.74/0.6/0.44A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

Heat Distribution Control Panel circulator pump
Basic 25-7.5SFC North America circulator pump

Pump Body Length 6 1/2 Feet Power  180/170/135W Max.flow  17 GPM Max head  19 Feet Current  0.9/0.7/0.5A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pump liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

domestic hot water circulating pump
Basic 25-12U North America circulation pump

Pump Body Length 7 1/16 Feet Power  230 W Max.flow  19 GPM Max head 38 Feet Current  2/1A Voltage/ Frequency  115V/230V 60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

PWM High Efficiency Heat pump circulator Pump
Master H 25-9 Heat Pump Circulator Pump

Power supply voltage 220~240V,AC,Protective earth Motor protection        No external protection required IP class IP44 Insulation class          H Humidity(RH)  Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature 2~+95℃ Connection/Unions Shinhoo Standard/ Molex/TE ​

PWM High Efficiency Heat pump circulator Pump
Master H 32-9 Heat Pump Circulator Pump

Power supply voltage 220V~240V,AC,Protective earth Motor protection        No external protection required IP class IP44 Insulation class          H  Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature 2~+95℃ Connection/Unions Shinhoo Standard/ Molex/TE ​

High Efficiency Heat pump circulator  for Central Air Conditioners
Master H 32-6 Heat Pump Circulator Pump

Power supply voltage 220V~240V,AC,Protective earth Motor protection        No external protection required IP class IP44 Insulation class          H  Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature 2~+95℃ Connection/Unions Shinhoo Standard/ Molex/TE ​

circulating pump With Check Valve supplier
Basic 15-4SFRC 115V/60Hz North America circulation pump

Pump Body Length 6 1/2 Feet Power  85/60/40W Max.flow  17.5 GPM Max head  15.5 Feet Current  0.74/0.6/0.44A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0MPA ​

hot water heater PWM High Efficiency circulator pump
Grand 25-17 Heat Pump Circulator Pump

Power supply voltage 220V~240V,AC,Protective earth Motor protection        No external protection required IP class IP44 Insulation class          H  Humidity(RH) Max 95% System pressure 1.0 Mpa Compliance EMC/RoHS/REACH/TUV/CE/EEI Environment temperature -30℃~55℃ Temperature class TF 95 Liquid temperature 2~+95℃ Connection/Unions Shinhoo Standard/ Molex/TE ​

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Submit
Looking for Honor?
Contact Us #

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

contact