What Are You Looking For?
|
Model |
Max. flow |
Power |
Rated flow |
Rated head |
Rated current |
Material of Pump body |
|
|
(m³/h) |
(W) |
(m³/h) |
(m) |
(A) |
|
|
Basic Pro 25-12SL-200 |
5 |
300 |
3.5 |
9 |
1.5 |
cast iron |
|
Basic Pro 25-12SXL-180 |
6.5 |
500 |
5 |
9 |
2.5 |
cast iron |
|
Basic Pro 25-12SXL-220 |
6.5 |
500 |
5 |
9 |
2.5 |
cast iron |
Item NO.:
Basic Pro 25-12SPumps can be used in single pipe or double pipe heating system,also can be applied to city apartments,suburb villa,cooling, air conditioning, boilers and solar system etc.
1. Pump contains two parts:hydraulic section and motor (with wet motor). Hydraulic section contains pump housing, impeller while motor includes stator,rotor,cartridge and air-venting nut.
2. Sealing:the pump does not use mechanical seal. Stator and rotor are sealed with cartridge made of stainless steel and two hart-resistant rubber rings, which ensure no leakage.
3. Lubrication of bearing and cooling of motor by inner circulation of pumped liquid.
4. Insulation class H, one speed or three speeds.
Pump with cast iron housing is widely used for delivering water for room heating. Pump with bronze housing is largely used in the floor heating system. For delivering domestic hot water recommend using pump stainless steel housing or bronze housing.
Medium Liquid
1. Thin, clean, non-corrosive and non-explosive liquid that does not contain any solid particles, fibers or mineral oil.
2. The pump must never be used to transport flammable liquids such as diesel and gasoline.
3. If the circulating pump is used in an application with high viscosity, the hydraulic performance of the pump will be reduced. Therefore, when selecting a pump, the viscosity of the liquid medium to be transported must be considered.
|
Model |
Liquid Temperature |
||
|
70℃（bar） |
90℃（bar） |
1100℃（bar） |
|
|
Basic Pro 25-12SL |
0.35 |
0.75 |
1.2 |
|
Basic Pro 25-12SXL |
0.4 |
0.75 |
1.4 |
Installation Drawing
|
Model |
Dimension |
Thread |
||||||||
|
|
H1 |
H2 |
H3 |
L1 |
L2 |
B1 |
B2 |
B3 |
M |
|
|
Basic Pro25-12SL-200 |
45 |
162 |
207 |
200 |
100 |
65 |
99 |
70 |
M8 |
G1 1/2-G1 |
|
Basic Pro25-12SXL-180 |
44 |
185 |
229 |
180 |
90 |
68 |
99 |
70 |
M8 |
G1 1/2-G1 |
|
Basic Pro25-12SXL-220 |
44 |
185 |
229 |
220 |
110 |
68 |
99 |
70 |
M8 |
G1 1/4-G1 |
Tags :
Model Basic 15-9S Power 120/80/65W Max.flow 1.8m³/h Max head 9m Current 0.53/0.4/0.25A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Model Basic 15-12S Power 270/240/160W Max.flow 3.5m³/h Max head 12m Current 1.2/1.1/0.75A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
Model Basic 20-5S/Basic 20-5SB/Basic 20-5SN/Basic 20-5SQ/Basic 20-5SP Power 85/60/40W Max.flow 2.8m³/h Max head 5m Current 0.4/0.3/0.22A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) and Plastic (P) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Model Basic 20-6S,Basic 20-6SN Power 100/70/55W Max.flow 2.8m³/h Max head 6m Current 0.45/0.35/0.25A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q),Plastic (P) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Model Basic 20-7S, Basic 20-7SB, Basic 20-7SN,Basic 20-7SQ,Basic 20-7SP Power 130/110/90W Max.flow 3.5m³/h Max head 7m Current 0.6/0.52/0.42A Voltage/ Frequency 115/230V 50/60HZ Pump housing cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) and Plastic (P) Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Rated Voltage/Frequency 230V/50Hz Insulation class Class H IP class IP44 Noise Index ≤50dB(A) Max System Pressure 10bar(1.0 MPa) Medium liquid Clean water Certification CCC\GS\UL\CE\RoHS\REACH\EEI
Rated Voltage/Frequency 230V/50Hz Insulation class Class H IP class IP44 Noise Index ≤50dB(A) Max System Pressure 10bar(1.0 MPa) Medium liquid Clean water Certification CCC\GS\UL\CE\RoHS\REACH\EEI
Model Basic 32-9F Power 300W Max.flow 8m³/h Max head 9m Current 1.5A Voltage/ Frequency 115/230V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Model Basic 80-12SF Pro Power 1500W Max.flow 40m³/h Max head 12m Voltage/ Frequency 380V /50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP42 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
Model Basic 50-12F Pro Power 1000W Max.flow 28m³/h Max head 12m Current 4.7A Voltage/ Frequency 220~240V 50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0Mpa
Operation range Feed up to 2.8 m³/h Head up to 12 m Supply voltage 1 x 230 V Liquid temperature from 2 to +60 °C Ambient temperature from 2 to +40 °C Max. operating pressure 6 bar Connection of PROMO 15-12A G 3/4"
Model Basic 50-16SF Pro Power 1300/1000/900W Max.flow 30m³/h Max head 16m Voltage/ Frequency 380V/50HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2~110℃ Max System Pressure 1.0Mpa
NO.1 Yanglin Road, Hi-tech Development Zone, 230088 Hefei, Anhui, P.R. China
© ANHUI SHINHOO CANNED MOTOR PUMP CO.,LTD All Rights Reserved.
IPv6 
