Automatic Boosting Pump
Automatic Boosting Pump
Automatic Boosting Pump

Promo 15-12A Automatic Booster Circulation Pump

Technical data

Operation range

Feed up to 2.8 m³/h

Head

up to 12 m

Supply voltage

1 x 230 V

Liquid temperature

from 2 to +60 °C

Ambient temperature

from 2 to +40 °C

Max. operating pressure

6 bar

Connection of PROMO 15-12A

G 3/4"

  • Item NO.:

    Promo 15-12A

1. Promo pumps are designed to increase the pressure in the currently used water supply systems of private houses.

2. First of all, they are used to generate head before heaters (gas-fired water heaters and direct-flow water heaters), washing machines and dishwashers.

3. Promo can also be used to increase water pressure in the shower or other points of water distribution.

4. Promo pumps are used in open systems and can be directly connected with the water supply system.

5. Promo pumps are equipped with a built-in flow relay that is used for automatic turning on/off the pump when the tap is open in the water distribution point.

6. The pumps are available with cast iron housing with a cataphoretic coating, impeller is made of composite material.

 

 

 

 

 

 

 

Operating conditions

Minimum inlet port pressure — 0.2 bar.

The pump should be placed in a non-aggressive and non-explosive environment.

Relative air humidity — not more than 95 %.

Pumped liquids

1. clean water.

2. chlorinated tap water.

3. The pump should not be used for pumping explosive liquids such as diesel fuel, petrol and other similar liquids. 

Construction

These pumps are of the canned-rotor type, that is pump and motor form an integral unit without shaft seal. Only two gaskets are required for sealing. The bearings are lubricated by the pumped liquid.

Thus, Promo motor is cooled with pumped liquid and is not equipped with air fan, which allows it working silently.

Due to a unique system of ceramic bearings, Promo pumps are exclusively durable and reliable. The pump is supplied with a cable with a Schuko plug.

A motor of Promo 15-12A is equipped with thermal overloading protection. In both cases, it is not necessary to have an additional external protection of the motor.

Enclosure class: IP43.

Insulation class: H.

very small circulator pump

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Submit

Related Products

Hot water recirculation pump combi boiler Three Speed Circulation Pump
Basic 15-9S Three Speed Circulation Pump

Model  Basic 15-9S Power  120/80/65W Max.flow  1.8m³/h Max head  9m Current  0.53/0.4/0.25A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0Mpa ​

Three Speed Circulator Pump
Basic 15-12S Three Speed Circulator Pump

Model  Basic 15-12S Power  270/240/160W Max.flow  3.5m³/h Max head  12m Current  1.2/1.1/0.75A Voltage/ Frequency  115/230V 50/60HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2~110℃ Max System Pressure  1.0Mpa ​

3 phase circulator pumps
Basic 20-5S Three Speed Circulation Pump

Model  Basic 20-5S/Basic 20-5SB/Basic 20-5SN/Basic 20-5SQ/Basic 20-5SP Power  85/60/40W Max.flow  2.8m³/h Max head  5m Current  0.4/0.3/0.22A Voltage/ Frequency  115/230V 50/60HZ Pump housing  cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) and Plastic (P) Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0Mpa ​

shinhoo hot water recirculating Three Speed Circulation Pump
Basic 20-6S Three Speed Circulation Pump

Model  Basic 20-6S,Basic 20-6SN Power  100/70/55W Max.flow  2.8m³/h Max head  6m Current  0.45/0.35/0.25A Voltage/ Frequency  115/230V  50/60HZ Pump housing  cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q),Plastic (P) Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0Mpa ​

Three Speed Circulation Pump manufacturer
Basic 20-7S Three Speed Circulation Pump

Model  Basic 20-7S, Basic 20-7SB, Basic 20-7SN,Basic 20-7SQ,Basic 20-7SP Power  130/110/90W Max.flow  3.5m³/h Max head  7m Current  0.6/0.52/0.42A Voltage/ Frequency  115/230V 50/60HZ Pump housing  cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) and Plastic (P) Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0Mpa ​

hot water recirculation pump
Basic 32-9F Circulation Pump

Model  Basic 32-9F Power  300W Max.flow  8m³/h Max head  9m Current  1.5A Voltage/ Frequency  115/230V  50HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0Mpa ​

Three Speed Circulation Pump With Flange Connection
Basic 80-12SF Pro Three Speed High Flow Circulation Pump

Model  Basic 80-12SF Pro Power  1500W Max.flow  40m³/h Max head  12m Voltage/ Frequency  380V /50HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP42 Liquid temperature range  2~110℃ Max System Pressure  1.0Mpa ​

high head circulator pump
Basic 50-12F Pro Single Phase High Flow Circulation Pump

Model  Basic 50-12F Pro Power  1000W Max.flow  28m³/h Max head  12m Current  4.7A Voltage/ Frequency 220~240V 50HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃  Max System Pressure  1.0Mpa ​

Three Speed Circulation Pump With Flange Connection
Basic 50-16SF Pro Three Phase High Flow Circulation Pump

Model  Basic 50-16SF  Pro Power  1300/1000/900W Max.flow  30m³/h Max head  16m Voltage/ Frequency  380V/50HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2~110℃ Max System Pressure  1.0Mpa ​

Circulation Pump ecm circulator pumps
Basic 40-16F Pro Single Phase High Flow Circulation Pump

Model  Basic 40-16F Pro Power  1000W Max.flow  13m³/h Max head  18m Current  4.9A Voltage/ Frequency  230V 50HZ Pump housing  Cast iron Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃  Max System Pressure  1.0Mpa  ​

Three Phase Three Speed Flange Connection Circulation Pump
Basic 80-8SF Pro Three Phase High Flow Circulation Pump

Model Basic 80-8SF Pro Maximum flow 32m³/h Rated flow rate 25m ³/ h Maximum head 8m Rated head 5m Input Power 1000w Ingress protection IP44 Noises Index(Rated flow point) <50dB(A) ​

electric water circulator pump for home use
Basic 25-4S Three Speed Circulation Pump

Model  Basic 25-4S/Basic 25-4SB/Basic 25-4SN/Basic 25-4SQ Pump body length 130/180mm Power  65/50/32W Max.flow  3.0m³/h Max head  4m Current  0.28/0.22/0.15A Voltage/ Frequency  115/230V 50/60HZ Pump housing  cast iron, stainless steel body(N) ,copper body(B) ,Bronze(Q) and Plastic (P) Pumped liquid  Water Insulation class  H Degree of Protection  IP44 Liquid temperature range  2-110℃ Max System Pressure  1.0Mpa ​

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Submit
Looking for Honor?

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

whatsApp

contact