Hot Water Recirculator Pump
Hot Water Recirculator Pump
Hot Water Recirculator Pump

Classic S 25-7.5 PWM High Efficiency Circulator pump

Technical data

Power supply voltage

220-240V 50/60Hz, PE

Motor protection

No external protection required

IP class

IP44

Insulation class

H

Humidity(RH)

Max. 95%

System pressure

1.0 MPa

Compliance

CE/ GS/ EMC/ LVD/RoHS/REACH

Environment temperature

0+40

Temperature class

TF110

Liquid temperature

-30+110 (Glycol up to 50%)

Voltage/ Frequency

230V/50HZ

Pump housing

Cast iron

Energy(EEI)

≤0.23-Part2

  • Item NO.:

    Classic S 25-7.5

1. Domestic heating and hot water supply systems

2. Air and ground source heat pump systems

3. Air-conditioning systems

4. Industrial hot water circulation systems

5. Solar thermal system

High efficiency circulator pumps with screwed connection, EC motor and integrated electronic power control, designed for circulating liquids in heating, air conditioning and solar systems.

With an energy efficiency index (EEI) at the ErP benchmark for most efficient circulators it contributes to energy savings.

The ideal choice for basic functionality needs.

Easy installation and operation

Equipped with Self Adapting Mode(Auto Mode, Factory Setting), pump

runs once the power is connected and adapts its performance according

to actual system needs.

Low noise and high comfort

Noise index: ≤42dB(A)

Low energy consumption

A class energy efficiency, Power consumption lowest to 5W

Multiple protection

With over-voltage and over-current protection

Eco-Design Benchmark

EEI≤0.20-Part 2

Quick release power plug

Start-up and stop the pump quickly.

Product photo and control modes

Running lights

Switch between AUTO and Min-Max with button

 

Advantages

1. Intuitive one-button operation makes selection of any control mode simple

2. No external motor protection required reducing installation time

3. High-torque start improves startup under harsh conditions

4. Maintenance free and noiseless due to canned-rotor design and use of robust components

5. Fast connection plug makes electrical installation quick, safe and easy

6. Insulating shells  are available to minimize heat loss in heating systems

circulating pump wholesale

Product photo and 8 control modes

Running lights

Setting

Explanation

Auto

Proportional pressure curve descending from highest to lowest

BL1

Min. proportional pressure curve

BL2

Max. proportional pressure curve

HD1

Min. constant pressure curve

HD2

Max. constant pressure curve

I

Constant Speed I

II

Constant Speed II

III

Constant Speed III

PWM

PWM duty cycle performance curve

 

1. LEDs indicate the actual operating status.

2. The pump has a ceramic shaft and radial bearings, carbon thrust bearing, stainless-steel rotor can, bearing plate and rotor cladding, composite impeller, all of which contribute to long life.

3. The pump is self-venting through the system, which contributes to easy commissioning. The compact design with integrated control box and control panel on side of the motor fits into most common installations.

4. The pump housing is made of cast iron and electro coated to improve the corrosion resistance.

5. The motor is a synchronous permanent-magnet/compact-stator motor characterized by high efficiency.

6. The pump speed is controlled by an integrated frequency converter incorporated in the control box.

Installation Drawing

Classic S 25-7.5 Installation Drawing

 

heating Booster circulator pump

Domestic Central Heating Circulating Pump

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Submit

Related Products

High Efficiency Circulator pump Manufacturer
Classic S 20-4 PWM High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

china manufacture circulating pump
Mega 25-12 automatic circulator pumps

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron/Stainless steel Energy(EEI) ≤0.23-Part2 ​

High Efficiency Circulator Pump For Sale
Classic S 25-5 PWM High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

most efficient circulator pump
Classic S 32-5 PWM High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

domestic hot water circulating pump
Classic S 20-6 PWM High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

ErP ready CV&AUTO High Efficiency Circulation Pump
Classic 20-7.5 High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

hot water booster pump
Classic S 32-4 PWM High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

most efficient circulator pump
Classic S 20-7.5 PWM High Efficiency Circulator pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

ecm circulator pumps
Classic S 32-7.5 PWM High Efficiency Circulator Pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

High Efficiency Circulator Water Pump with LED Display
Master S 20-8 High Efficiency Circulator Pump with LED Display

Power supply voltage 220~240V 50/60Hz, AC Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/RoHS2.0/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃(Glycol up to 50%) ​

High Efficiency CV&AUTO Circulator Pump
Classic 20-4 High Efficiency Circulator pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

Factory of  High Efficiency CV&AUTO Circulator Pump
Classic 25-4 High Efficiency Circulator pump

Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0~+40℃ Temperature class TF110 Liquid temperature -30~+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2 ​

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Submit
Looking for Honor?

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

whatsApp

contact