What Are You Looking For?
|
Pump Body Length |
6 1/2 Feet |
|
Power |
335W |
|
Max.flow |
36 GPM |
|
Max head |
36 Feet |
|
Current |
1.5A |
|
Voltage/ Frequency |
230V 50HZ |
|
Pump housing |
Cast iron |
|
Pumped liquid |
Water |
|
Insulation class |
H |
|
Degree of Protection |
IP44 |
|
Liquid temperature range |
2-110℃ |
|
Max System Pressure |
1.0MPA |
Item NO.:
Basic 25-12F1. Basic series circulator pump, researched and developed by scientific research personnel of our company has following merits : low noise, low leakage, environmental protection, elegant appearance, easy installation, reliable operation and so on.
2. It can be used for single and double-heating systems and large-scale mixed-loop system.
3. It also can be used to supply water and add pressure for mansion of city, villa of suburb, house to match with industrial equipment, to supply water in cycle for cooling air-condition,boiler and solar energy, supply hot water and keep warm in cycle,etc
1. Users can choose models of pump according to the flow, head, power, current etc.
2. The pumps have union connection,flange connection and sweat connection. If customers have some special request, we can design it for you.
3. Material of pump body is usually cast iron, generally used under these conditions, considered to be closed systems pumping water or water/glycol mixtures.
4. If the water conditions exist are not compatible with cast iron, we recommend the bronze or stainless steel, such as the heating system or cycling the potable water in the open system.
Running Conditions
1. Power Source: Voltage115V-230V,Frequency:60Hz
2. The greatest pressure of the system: No more than 145psi (10bar)
3. To avoid NHP damage to the pump bearing, pumps should be maintained the minimum pressure: (In a pressure system, the required inlet pressure is the allowable system pressure. In a system open to the atmosphere, the required inlet pressure is the minimum distance the pump must be located below the lowest possible water level of the water source.
|
Liquid Temperature |
185F(85℃) |
194'F(90℃) |
230F(110℃) |
|
Entrance Pressure |
2t(0.6m) Head |
10 ft(3m) Head |
33 ft(10m) Head |
|
0.7psi(005bar) |
4psi(0 28bar) |
14.5psi(1bar) |
4. Transmission Fluid: Lean.clean,non-corrosive and non explosive liquids. and without any solid particles fibers or mineral oil. Pump absolutely must not be used to transport flammable liquids such as diesel and petrol.
5. The pumps should work under air temperature of the environment range of32℉(0℃)~104℉(40C), liquid temperature range of 36F(2℃)~230F(110℃). And the ambient temperature should always be lower than the liquid temperature.(One special model:GPD25-12SF, the highest liquid temperature is150F(66℃). Note:If the pump is equipped with a timer, the maximum liquid temperature is150℉(66℃).
Structure of Pumps
1. The main parts of the pump are: pump body, impeller, stator, rotor, shielding sets, gas screws and so on.
2. Sealing: The pump doesn't use mechanical seal. Stator and rotor are sealed with stainless steel shield. Overall Structure is shielded with two heat-resistant rubber gasket sealed to avoid leakage.
3. Lubrication and Cooling:The pump used in inline cycle. the bearing is lubricated and cooled by water.
4. Motor: The motor is a 2-pole asynchronous squirrel-cage PSC motor.It is class H insulation and equipped with thermal protection. Basic series are single-speed,Basic S series are three-speed. Basic series can be equipped with timer control to fix the time that pump works.Motor horsepower range from 1/25 to 1/6, and power consumption from 25W to 335W
Tags :
Pump Body Length 6 1/2 Feet Power 200/190/135W Max.flow 32 GPM Max head 30 Feet Current 1.8/1.7/1.2A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Pump Body Length 6 1/2 Feet Power 100/70/55W Max.flow 17 GPM Max head 19 Feet Current 0.9/0.7/0.5A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pump liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Pump Body Length 6 1/2 Feet Power 85/60/40W Max.flow 17.5 GPM Max head 15.5 Feet Current 0.74/0.6/0.44A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Pump Body Length 6 1/2 Feet Power 85/60/40W Max.flow 17.5 GPM Max head 15.5 Feet Current 0.74/0.6/0.44A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Pump Body Length 6 1/2 Feet Power 85/60/40W Max.flow 17.5 GPM Max head 15.5 Feet Current 0.74/0.6/0.44A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Pump Body Length 6 1/2 Feet Power 180/170/135W Max.flow 17 GPM Max head 19 Feet Current 0.9/0.7/0.5A Voltage/ Frequency 115/230V 50/60HZ Pump housing Cast iron Pump liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Pump Body Length 7 1/16 Feet Power 230 W Max.flow 19 GPM Max head 38 Feet Current 2/1A Voltage/ Frequency 115V/230V 60HZ Pump housing Cast iron Pumped liquid Water Insulation class H Degree of Protection IP44 Liquid temperature range 2-110℃ Max System Pressure 1.0MPA
Maximum flow(m³/h) 12 Rating flow(m³/h) 8 Maximum head(m) 35 Rating head(m) 25 Inlet pipe diameter RP1 1/2" Outlet pipe diameter NPT1 1/4" Input powwer(KW) 0.8 IP class IP42
Power supply voltage 220~240V 50/60Hz, AC Model Master 32-8 Power 70W Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Certification CE/ GS/ EMC/RoHS2.0/REACH Environment temperature -30℃～+70℃ Temperature class TF110 Liquid temperature -20℃～+110℃(Glycol up to 50%) Type of connection/unions Molex /TE/ Shinhoo standard
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%)
Max. Flow(L/min) 115 Rated flow(L/min) 50 Max. Head(m) 25 Rated head(m) 20 Inlet diameter (mm) 25 Outlet diameter(mm) 25 Input power(W) 880 Output Power(W) 600
Power supply voltage 220-240V 50/60Hz, PE Motor protection No external protection required IP class IP44 Insulation class H Humidity(RH) Max. 95% System pressure 1.0 MPa Compliance CE/ GS/ EMC/ LVD/RoHS/REACH Environment temperature 0～+40℃ Temperature class TF110 Liquid temperature -30～+110℃ (Glycol up to 50%) Voltage/ Frequency 230V/50HZ Pump housing Cast iron Energy(EEI) ≤0.23-Part2
NO.1 Yanglin Road, Hi-tech Development Zone, 230088 Hefei, Anhui, P.R. China
© ANHUI SHINHOO CANNED MOTOR PUMP CO.,LTD All Rights Reserved.
IPv6 
